Fluorescent Colors for Excalibur® 950 Series - High Opacity

Colors: Fluorescent Blue, Fluorescent Green, Fluorescent Magenta, Fluorescent Orange, Fluorescent Pink, Fluorescent Red, Fluorescent Violet, Fluorescent Yellow.

Technical Information for Excalibur® 950 Series

Transfer Paper: 950 Series Inks will work well on most commonly used papers such as Soft Trans, Trans 55, Ultrastrip 2000, Tullis Russel or Transal.

Screen Mesh: For opaque colors on darks, use meshes of 60-110/inch (24T-44T cm).

Curing: It is important to “Gel” the inks on the paper rather than fully curing them. Recommended gelling temperature is 240°F-260°F (116°C-127°C) for 30 to 60 seconds - use of temperature strips will help to calibrate the curing with the dryer you are using. If you are using Plastisol Puff and Printable Adhesives these will be printed and gelled last. Improper curing of hot split transfers can affect the shelf life, release and opacity. Be careful not to under cure as this can affect the shelf life.

Reducers: 950 Series Inks are formulated ready for use. If it is necessary to reduce viscosity use 902 Viscosity Reducer.

Squeegee: Medium Durometer (70) is recommended.

Stencil: All types of stencils may be used for screen printing 950 Series Plastisol Inks.

Transferring: All 950 Series Inks are designed to be transferred at 375°F-400°F (191°C-204°C) for 6 to 12 seconds at medium pressure.

Ink Cleanup: Use Enviro Series 2000 Green or Enviro Series TR Blend.