Specialty Colors for Excalibur® 960 Series

Colors and Base: Metallic Copper, Metallic Green, Metallic Purple, Metallic Red, Metallic Royal, Metallic Gold Sparkle, Metallic Old Gold, Metallic Silver, Gold Gilitter, Silver Glitter, Techno Silver Glitter, Gold Dust Glitter, Electric Green Glitter, Ice Wine Glitter, Fire and Ice Glitter, Ice Blue Glitter, Crystallina, Glow-in-th-Dark, Metallic Clear Base.

Fluorescent Colors for Excalibur® 960 Series

Colors: Fluorescent Blue, Fluorescent Green, Fluorescent Magenta, Fluorescent Orange, Fluorescent Pink, Fluorescent Red, Fluorescent Violet, Fluorescent Yellow.

Technical Information for Excalibur® 960 Series

Transfer Paper: 960 has been tested on Tullis Russel HS, and Burkhartdt Freeman’s Ultrastrip 3000 coated heat transfer papers. It is recommended that tests be done on other papers to determine suitability.

Screen Mesh: It is recommended to use mesh counts of 74 to 160/inch ( 30 to 64T cm), depending on opacity level that may be required.

Curing: It is recommended to “Gel” the inks on the paper rather than fully curing them. Recommended gelling temperature is 240°F-260°F (116°C to 127°C) for 30 to 60 seconds. Undercuring can affect shelf life which could cause release and adhesion problems.

Reducers: 960 Series are formulated ready for use. If it is necessary to reduce viscosity use small quantities( up to 3%) of 902 Reducer. (For Phthalate Free version use 902PF).

Squeegee: Medium Durometer (70) is recommended.

Stencil: All types of stencils may be used for screen printing 960 Series Plastisol Inks.

Transferring: 960 Series are designed to be transferred at 375°F - 400°F (191°C - 204°C) for 5 to 12 seconds at medium pressure. Higher temperature range will allow faster times.

Ink Cleanup: Use Enviro Series 2000 Green or Enviro Series TR Blend.